Philodendron Birkin Care | Easy Tips and Guide

Philodendron Birkin Care Easy Tips and Guide

The Philodendron Birkin is a lovely indoor plant that hasn’t been around for very long. Its dark green leaves, with their vibrant pinstripes and enormous form, create a bold statement. It’s also not a difficult plant to grow, however you should be wary about overwatering!

The most crucial component of Philodendron Birkin care is to keep it in bright, indirect light as much as can. Keep it near a window, but not in full sunlight, since this can cause the leaves to burn. You should also plant it in damp soil and water it only when necessary. Other considerations include maintaining a moderate, somewhat humid atmosphere and fertilizing with an organic or water-soluble fertilizer.

Do you possess a pair of Birkins or are you interested in purchasing one? Here’s how to care for your Philodendron Birkin plant.

Philodendron Birkin

This philodendron variegation is a natural occurrence in the Philodendron Rojo Congo. Its leaves were then split and reproduced as a variegated plant. It’s also known as Philodendron ‘White Wave,’ and it’s currently a popular indoor houseplant.

Easy Philodendron Birkin Care Easy Tips and Guide indoor

Surprisingly, the Philodendron Birkin is a ‘unstable’ variegation, which means it can return to looking like its parent plant. It can also produce leaves that are totally white or have pink highlights.

Because they’re easygoing and exhibit when they’re unhappy, these tropical plants are excellent philodendrons for beginners. Just keep in mind that the leaves and stems of this plant contain calcium oxalate crystals, which are poisonous to dogs.

Philodendron Birkin Care


One of the simplest things to get properly is watering your Philodendron Birkin. When it comes to plant care, watering is typically a challenge, but not for this plant. The Philodendron Birkin is a demanding plant that requires watering as soon as the soil becomes dry.

If you’re searching for a watering schedule for this plant, here’s what you should do: Once a week, water this plant. It doesn’t matter what season it is; this plant like to spend the most of its time in moist soil. It like to be in moist soil, but it also prefers to be dry.

Philodendron Birkin Care propagation by division


The Philodendron Birkin, like most other philodendrons, loves bright to moderately indirect light.

Plants that don’t get enough light to meet their needs won’t be happy—they’ll put forth sad-looking growth, if any at all.

Plants’ leaves, on the other hand, will be damaged by too much light. The sun will, in essence, burn them. This is why it’s critical to use INDIRECT lighting. The plant should not be exposed to direct sunlight.

What if I can’t develop a Birkin because I don’t get enough light?

The lack of natural light isn’t a problem because grow lights are available! Full-spectrum grow lights are designed to look like the sun (but they are, of course, far less intense than the actual sun, so pointing them directly at your plant is fine).

This full-spectrum LED clip-on grow light is one of my favorite grow lights. It may be readily moved into a variety of locations to meet the demands of your plants. This pair of LED stick-on grow light strips is also one of my favorites. They’re ideal for displaying on shelves!

Philodendron Birkin prefers warm weather.

Philodendron Birkin, which are native to the tropics, will suffer at colder temperatures. Make sure it’s not too close to any drafty windows or doors, as the colder air from outside will hurt your plant over time. A digital thermometer can help you prevent chilly breezes and hotspots in your home.

Soil for Philodendron Birkin

As we learned in the part on watering your Philodendron Birkin, this plant like moist soil but also enjoys being dry. You should also water this plant once a week, as we previously instructed. So, how does this relate to the soil? That is, you should look for a soil that stays moist for at least a few days but also dries off. It also implies that the soil you select for this plant must be able to withstand frequent watering.

When all of these factors are considered, the ideal soil for your Philodendron Birkin consists of the following ingredients:

  • Potting soil in general
  • Perlite is used to provide great drainage.
  • Sphagnum moss is used to keep moisture in the air.

The perlite aids in the rapid drainage of surplus water in the soil. This is necessary to avoid root rot caused by the plant being submerged in water all of the time. Because your plant like it, the perlite also helps the soil dry up quicker.

Sphagnum moss may be added to the soil to help retain moisture. Sphagnum moss is an excellent way to provide moisture to your soil. The perlite and Spaghnum moss work together to keep the soil moist and airy.

The soil compacts when you water your plant often. This is detrimental to drainage and oxygen supply to your plants’ roots. Adding perlite and Sphagnum moss to your soil can assist keep it airy and allow you to water your plant properly.

philodendron birkin variegation care


The Philodendron Birkin is an indoor plant that grows quickly. Because it grows so fast, it expends a lot of energy in order to produce new leaves. If you enjoy how rapidly this plant grows and want it to keep doing so, you’ll need to fertilize it on a regular basis.

You should fertilize your Philodendron once a month throughout the growing season, which is spring and summer. This will provide your home plant with the energy it requires to keep growing at a rapid rate. You may fertilize your home plant in a variety of ways. To feed your plant, you can use sticks, balls, or liquid fertilizer. Because this plant like to be watered once a week, liquid fertilizer is one of the simplest methods to feed it. You may feed your plant by simply adding fertilizer to the water once a month.

Is humidity good for Philodendron Birkin?

Yes, the philodendron genus prefers tropical climates, thus increasing humidity will make the Birkin extremely happy. However, I would not advocate misting.

This strategy is popular with certain individuals, but I don’t think it’s really successful. Misting your plant regularly might also promote rot since the foliage is continually damp.

So, what are your options? Personally, I like to use a humidifier. It’s really effective, lasts a long time, and may aid a lot of plants at the same time (depending on the size). One of my favorite humidifiers is seen here.


Unless there are dead or damaged leaves on your Birkin, there is no need to prune it. You may leave yellowed, aging leaves as long as they aren’t an indicator of a problem with your plant.

Repotting Philodendron Birkin

Because the Philodendron Birkin grows so quickly, it’s best not to keep it in the same pot for longer than two years. Your Birkin plant may even overflow its pot in a single growing season! Repotting your Birkin should be done once a year or when it begins to show indications of being rootbound, since this will limit its development.

Choose a planter that is 2.5–5cm larger than the existing pot size for repotting Birkin plants. (Remember the drainage holes!) This allows it lots of room to flourish while avoiding overwatering in a large pot.


Many tropical plants, like the Philodendron Birkin, are toxic for both humans and pets. You should keep it out of the reach of your cats and dogs, but also small children. When the leaves and stems are chewed on, this plant is only toxic. So if your pets eat this plant, call your vet right away for help.

The leaves and stems are made up of calcium oxalate crystals, which can be irritating and cause stomach problems.

Philodendron Birkin Flowers

Most aroids have spathe and spadix, like the Birkin. This is not actually a flower, but a leaf that has been changed into a stalk to protect the spadix (which is covered in lots of tiny flowers).

The bloom isn’t very pretty, and it can even take energy from the rest of the plant! Because of this, you should think about cutting them off with a clean pair of scissors or a knife.

Propagation of the Philodendron Birkin

You have a several options for propagating your Philodendron Birkin.

Philodendron Birkin propagation cut

Cuttings for Philodendron Birkin Propagation

  1. Find a stem that has at least one healthy leaf on it. If feasible, choose a piece with some aerial roots to speed up the cutting process, although it’s not required.
  2. Cut the stem below a node using clean, sharp scissors or a knife. The petiole (the leaf’s stem) meets the main stem at the node. It’s critical that your cutting has a node since nodes are the source of new development (roots!).
  3. Place your cutting in moistened potting mix in a bright to medium, indirect light source.
  4. As the roots grow, keep the potting mix mildly moist. Maintaining a high level of humidity will also aid your cutting.
  5. Give your cutting a moderate tug and feel for resistance after a few weeks to see whether it has a root system. If your cutting develops resilience, you may start treating it like a normal plant. If not, don’t worry; your plant just requires more time!

Is it possible for me to propagate Philodendron Birkin water?

Yes, you may let the roots develop in water before planting it in potting mix; however, this is an extra step, and the roots will require some time to acclimate when moving from water to potting mix.

Carry on with the same steps as before. Make sure the node is submerged, but any leaves are visible above the surface. Replace the water as it becomes dirty or refill it as needed.

When the roots are two to three inches long, pot the plant and give it a good watering.

Philodendron Birkin Division Propagation

Division is a lot faster technique to “create” additional Birkins if you don’t want to wait for new roots to sprout.

Perhaps your adult philodendron has given birth to a few offspring in the pot. Alternatively, you may have purchased a “large” plant that is actually a collection of smaller plants planted together. These are excellent division prospects.

  • Remove the plant from its pot and look for one or more portions that are separate of the mother plant and have their own root systems.
  • Separate the root systems with care. It’s difficult to avoid a little root breaking, but try to keep the roots as undamaged as possible.
  • Each item should be placed in its own, adequately sized pot. You may need to give the mother plant a smaller pot depending on how much you separated. Overwatering might occur if the pot is too large. It’s essentially a case of too much damp soil and not enough plant.
  • Give each “new” plant some time to acclimate to their new surroundings by watering them (they might go through some shock). That concludes our discussion.
Philodendron Birkin's leaves problems

Philodendron Birkin’s leaves

The leaf colors of the Philodendron Birkin are varied. The young leaves will be totally white when they arrive. As the leaves become older, they will become darker. Your plant’s oldest leaves will be dark green, while the newest leaves will be totally white. The white stripes on green leaves will appear on any leaves in between those two extremes, as seen in the photographs in this guide.

Leaves that are white or dark green in color.

The new leaves of the Philodendron Birkin will be almost entirely white to completely white. Their color will darken to a dark green as they get older. The Birkin plant’s characteristic white stripes will appear on maturing leaves.

Yellow Leaves

There are two possible explanations for yellow leaves on your Philodendron Birkin: old age or overwatering. This is an old leaf if it is near the bottom of the plant and was once dark green. You should not be concerned in this scenario because this is the house plant’s normal lifespan.

You may be overwatering your plant if this isn’t an old leaf. Check if your plant is standing in a puddle of water to discover if this is the case. To avoid overwatering your plant, make sure your pot has drainage holes. If you’ve overwatered your plant, ensure sure the soil is completely dry before watering it again. Read “How to Rescue a Plant from Overwatering” for further information on what to do if you’ve overwatered your plant.

Brown Leaves

The Philodendron Birkin, as we’ve learned, is a tropical plant that thrives in dampness. It’s too dry when the leaves get brown and crispy, and you should attempt to locate a more humid location for it.

Thank you for taking the time to read this article. I hope it proves useful in maintaining the health and beauty of your plants! If you need additional information on a certain plant, you can always request a plant guide or contribute a plant to receive one for the plant you’re having difficulties with.

Birkin Reverting

The Philodendron Birkin variegation may disappear and the leaves return to a solid green. This can occur due to several causes such as lighting problems, fertilization, watering, genetics and humidity.

Read carefully about this issue at: Philodendron Birkin Reverting, What Does That Mean?

Philodendron Birkin Diseases

Philodendron Birkin Diseases

Root rot is a serious problem.

One of the most common problems with a Philodendron Birkin is root rot. Overwatering, poorly draining soil, excessively large pots, or too-cool temperatures are the most typical reasons, all of which result in excess moisture in the soil.

Wilted, discolored leaves, reduced growth, and wet soil are all signs of root rot. If you examine your plant’s roots, you may see that they have become white or black and are mushy to the touch.

To treat root rot, take the plant out of it`s pot and thoroughly clean the roots under running water. Replace the original soil with a fresh mixture of potting soil and perlite. Replant your Philodendron Birkin after trimming away any infected roots and leaves. Keep an eye on it to see whether it recovers — and keep an eye on how much water you use!

Bacteria and fungi

Bacterial leaf spot (Xanthomonas) and bacterial blight can be caused by overwatering (Ewinia).


Spider mites are among the most destructive pests that may infest your Philodendron Birkin plants. These little, reddish-brown pests consume all of the nutrients in your plant’s leaves, causing them to dry out and fall off. To cure your Birkin plant, use a moist cloth or a spritz of water to physically remove the pests. After that, prune off all of the damaged leaves and clean the plant with a light pesticide soap.

Thrips are another prevalent Birkin pest. These are tiny bugs that are light yellow or black in color. You’ll know you have an infestation if the leaves of your Birkin plant get pale and splotchy. To get rid of any impacted growths, prune them and apply an insecticide soap.

Leave a Reply