Anthurium Flamingo Flower is a beautiful flowering houseplant that is simple to develop (and enjoyable to get around). These beauties have large, glistening red/pink/purple blossoms and dark green glossy leaves.
Flamingo flower or painter’s palette is a species from the anthuirum genus, luckily, anthuriums are not difficult to care for and can flourish indoors when given the ideal problems.

About the Anthurium
Anthurium is a tropical flowering herbaceous perennial plant from Central and South America. The shrub cover shields the plants out of direct sun when developing a warm, humid atmosphere.
In their natural surroundings, anthurium plants develop mostly in trees, however, also occasionally develop on the floor. They utilize aerial roots to attach themselves into trunks and branches, reaching up to secure additional light. Their climbing addiction enables anthurium plants to get good air flow, which can be essential for their wellbeing in the tropical rainforest atmosphere.
The significant waxy pink blossoms are now not flowers in any way, but vibrant bracts or spathes that encircle the very small flowers in the center. The spike at the middle of an anthurium blossom, known as the spadix, is the where the genuine miniature blossoms of this anthurium are found.
Caring for anthurium for a houseplant is all about mimicking the cluttered jungle-like climate of anthurium’s normal home.
Both you’ll probably encounter are Anthurium Andreanum along with Anthurium Scherzianum. The two kinds are fairly adapting of indoor surroundings, but even then they may be tricky, but if you’ve had overall expertise with houseplants (or so are eager to understand ) you need to be OK.
Temperature
Being a tropical plant, anthuriums grow best when indoor temperatures aren’t too cold or too warm and preserved in the selection of 60°F into 90°F (15°C into 32°C). However, anthuriums grow best when indoor temperatures during the night are stored around 68°F (20°C) and around 86°F (30°C) throughout the day.
If you would like to present your anthurium a rest outside as soon as the weather warms in spring, make sure you put it back indoors when night temperatures begin dipping below 50°F (10°C) therefore it does not suffer harm.
Light
The very best location for the anthurium houseplant is close to a bright window in which it could acquire diffused indirect lighting with no scorch of direct sun. This is also a spot with fine constant heat and moisture, and some air going round their leaves.
But during winter while the plant is still dormant, they’ll tolerate getting less light. Do not set the anthurium in a indoor place that get bright, direct light particularly during the day or so the foliage may burn off. –
Watering
Anthurium’s do not enjoy dryness in the roots, however, intermittent adventures of the will not be a deal breaker. For the best results use tepid to warm to warm water and attempt to maintain the soil at slightly moist at all times.
Make an effort not to allow the soil get rancid or move bone dry. The origins need to be sitting in potable water plus they should not dry either. Air humidity is quite useful (yet another motive for this humidifier in the winter months) . You are able to increase humidity with a humidifier, but additionally by misting the plant using water and by placing it along with a plate of water .
Soil
Like orchids, anthurium doesn’t fare well in regular potting mix. Anthurium is among these houseplants that does require specific potting soil. These plants have been utilized to climbing on either side of trees at the center of the tropical rainforest…it makes sense they would need particular soil when developed into a container.
You can combine these up yourself
Humidity
Native to the hot/warm and humid tropical areas of Ecuador and Colombia and considered as a tropical blossom evergreen in its own normal habitat, anthuriums develop within an epiphyte, employing the jungle trees as service.
Because of this, it’s simply natural that anthuriums demand a humid environment indoors for appropriate development. Keeping up a humidity level of about 80 per cent is preferred.
It’s possible to easily make humidity to your plant by attaching it with water every day or two. Like I have quite a great deal of houseplants, I purchased a humidifier, making it really simple to keep decent humidity levels because of my own plants with minimal work.
To maintain the humidity, do not put your anthurium near a heating port or system that generates warm, humid airconditioning.
Fertilizer
To maintain your anthurium joyful, healthy and also to encourage flowering, fertilize it every 2 months. Utilize a water-soluble mix with a high centre number, that’s the sum of calcium that the item comprises that boosts flowering.
You’re able to put on the fertilizer once you water using a half-strength mix and mowing till it runs out of the base drain holes.
Fertilize while the anthurium is growing during spring and during September. Cease fertilizing in autumn and winter, since the plant is at its dormant phase where all expansion obviously fades.
Re-Potting
Try to repot your Anthurium every year or two in Spring when it is needed. If it has to do with the potting medium no specific requirements are required, ordinary potting soil or houseplant mulch is totally fine, but incorporating small quantities of bark or perlite into the combination will probably be valuable and also help prevent drainage issues.
Pruning
Tend to this plant and eliminate dead/damaged/diseased foliage when detected. This normal maintenance should assist the plant receive the new air flow it requires.
Propagation
Anthurium is normally propagated by taking cuttings and cleaning these to make new plants. Anthurium could be propagated by either stem cells and root canals.
However the principal motive Anthurium’s are so expensive is because they require a very long time to develop in an appealing looking sized plant life. So keep that in mind if you’re trying to enlarge your group through propagation since it might be several years until the offsets begin hammering.
Poisonous To People And Pets?
Anthuriums include calcium oxylate crystals, that can be poisonous to humans, dogs and cats, so maintain your plant from the range of inquisitive pets and kids.
Anthurium Problems

Yellow leaves
If your anthurium’s leaves start yellowing, which eventually encompasses the entire leaf, you may be overwatering. Stick your finger in the soil and if it is moist and soggy feeling, wait till the top inch becomes dry before watering again.
If it has to do with anthuriums, it is far better to submerged than utilize a lot of too often.
Brown leaves
In the event the tips of your anthurium’s leaves are turning brown and the illness appears to grow, more than likely you are maintaining the soil too tender.
This will most likely mean you’ll need to water approximately once per week throughout the growing season, and approximately every other week .
Since the brown will remain to the affected leaves even after you’ve corrected the irrigation issue, it is possible to cut the browned segments with sterile pruning snips.

No Flowers
Your Anthurium plant is only going to produce flowers if it is happy. Heating temperatures, moist soil and affordable levels of light are required. The plant may also require feeding in time to time. Attempt to fix all of these issues and you are going to find the blossoms.
Tips For Reblooming Anthuriums
1. Choose the correct place
Ideally, you need your anthurium to maintain a brightly lit, warm room which receives sufficient air flow –without even risking drafts.
Despite the fact that you do not need your anthurium plant from direct sun, keep it close to a window so that it can get lots of bright, indirect light.
2. Pay attention to watering well
Among the biggest dangers to a anthurium’s wellbeing is root decay from improper watering.
Oversaturating an anthurium plant, or even giving them enough oxygen, may possibly cause health conditions that could cause the passing of the plants in case you do not take rapid actions. To avert this issue, provide your anthurium six ice cubes or half-dozen cup value of water weekly.
3. Remove the wilted
When you observe a blossom in your own anthurium is past its prime, and your very best choice is to safely eliminate it. This permits your plant to devote more energy into creating fresh blooms, instead of keeping neglecting blooms alive more.
Because anthuriums will not rebloom on precisely the exact same stem, then you can get rid of any wilted blossoms by pruning the whole stalk off in the bottom of this plant.
4. Remove diseased and dead leaves
Normally, brown leaves are not something to be alarmed about and may just be eliminated if you sew wilted blooms. Typically, brown leaves may be removed by lightly tugging along with your palms nonetheless, you might have to utilize cutting shears whenever they wont detach readily.
If you become aware of that your anthurium plant has always brown leaves which happen away from the pure life cycle of the plant, you might have to change your care regimen.
Now that you have given your anthuriums the care that they need to flourish, it is merely a matter of time before a fresh bloom will seem to delight you.