Within the Alocasia genus, the Alocasia Red Mambo (Alocasia Azlanii) is an extremely uncommon plant variety. The one-of-a-kind leaves of this plant are one of the many things that set it out as a truly remarkable specimen. These leaves have a shape that is similar to that of a standard Alocasia, but they have a slightly wrinkled appearance and a glossy appearance.
On the island of Borneo, the Alocasia Red Mambo plant first takes root in the Serawak Region. Because it is located in such a remote area, the rest of the world didn’t learn about its existence until after the most recent cultivation. Now, as you can see, the popularity of this plant is skyrocketing all over the world. This Alocasia Red Mambo has been cultivated for use as a foodstuff in the regions surrounding the cultivator for approximately 28,000 years.
Alocasia Red Mambo Features
Waxed green is the primary hue of the leaf, and the purple, red, or even black veins, as well as the light green sides, serve to draw attention to the foliage. The form is round, and the leaves have a vertical growth posture. It appears shiny and wrinkled from a distance, yet it is still really lovely. The leaves have the potential to reach a length of 20 centimeters when they reach maturity.
The Red Mambo plant has a stem that is around 25 centimeters in height. In addition, the blooms that are generated are a creamy white tint.
When caring for this plant, as is the case with other types of Alocasia, it is important to bear in mind that it originates from tropical care. In almost every aspect of its care, your primary objective should be to recreate, as closely as you can, the conditions that it would experience in its native environment. In light of the aforementioned, it is important to keep in mind that the Azlanii is, for the most part, a tropical plant. This is the correct approach to go.
Grow and Care Alocasia Red Mambo (Alocasia Azlanii)
This Alocasia Red Mambo can be grown with little to no experience or training. You won’t run into any snags if you just focus on the basics.
Water is one of Red Mambo’s favorite things, and it is abundant where this species naturally occurs. Quantity and frequency regulation still fall under your purview. Two weeks is the average interval between waterings. If the top five centimeters of the soil, or around 30%, has dried up, it is time to re-wet the soil. The soil must be moist, but not soggy, after being watered.
There is an overwatering problem with the Alocasia Azlanii/Red Mambo watering system. The most noticeable symptom is the darkening and curling of the leaf edges. Also, fungi will begin to grow in the soil. This happens frequently when there is too much water on the soil, causing poor drainage and, in turn, the dreaded root rot. To avoid the plant’s roots drying out and dying, maintain a level of at least 1.5 inches (or 2 centimeters) of water in the container. On the other hand, don’t allow the roots to sit in standing water.
Underwatering. the leaves will turn a dull yellow as a result. There’s a chance the leaves will dry out and turn brown. Potentially, the leaves will also get black patches. In spite of this, you should limit your water intake during the winter and the cold season.
When determining whether or not plants need watering, some individuals use a moisture probe as a gauge. Soil moisture content assessment is important to the functioning of this instrument. Indicating that more water is needed for your plant if the number 2 is visible. If you want to water your plant properly, avoid getting water on the leaves by starting from the base.
RELATED: Why Is My Alocasia Drooping and What Can I Do About…
The plant can only be grown in soil that can retain enough water for its needs. This soil mix that you can use as perlite to coconut fiber ratio of 1:2. You might also try a composition of potting soil, peat moss, and perlite in the proportions of one-third-one-third. This combination will produce soil that is both well-drained and aerated.
Good soil will hold just the right water of water for the plant while letting the excess runoff. In turn, this prevents the roots from getting too wet and rotting from the inside out. Even if the plant’s growth depends on the potting mix, regular checks are still necessary. In some situations, the soil’s surface layer needs a lot of time to dry out. When you mix soil, you can accidentally create an unbalanced composition. Oversaturation with peat moss or perlite is the most common problem. The issue could be resolved by substituting a prepackaged cactus mix.
Once mature, after about 3 to 4 months, they need to be stored at a temperature of a minimum of 65 °F (18 °C) during the day and 50 °F (10 °C) during the night. If you want your plants to grow and flower, you need to maintain them at certain temperatures. To the extent that you can live in a space without overheating, your plant will also be able to do so.
As with any tropical or Alocasia plant, be aware of drafts of cold air, as they can cause damage (burning) to the foliage of the plant. Furthermore, the abrupt character of these changes contributes to unwanted stress, which in turn makes the plant more vulnerable to other issues, such as diseases and pests.
During the growing season, fertilize the plant once or twice every month spring and summer. Fertilization should begin in the fall and continue every month if necessary. After that, the plant shouldn’t be fed while it’s dormant in the winter.
If you don’t want to over-fertilize your garden, be sure to follow the label’s directions. In most cases, you shouldn’t utilize more than 50 percent of the diluted, matched fertilizer that has already been spread. From time to time, people will also give the plant a dose of high-nitrogen fertilizer after mixing it with water. Putting out a plant fire is an absolute last resort.
The Alocasia Red Mambo prefers a climate with a humidity level of at least 60% and does poorly in environments that are too dry. Despite this, it is well-adapted to humid conditions and can survive at slightly warmer than normal temperatures. You shouldn’t be too surprised by this, because Borneo is the plant’s natural environment. This implies that it will undergo more stress if it ever finds itself in conditions with low humidity, resulting in a reduction in its rate of growth.
Leaf margins and patches turning brown are telltale signs of low humidity. If you feel that the air around you is too dry, you can add moisture by spraying water from a bottle or utilizing an automatic mister. The leaves won’t get as dehydrated as they otherwise would if you do this.
To avoid wilting due to drying out too soon due to evaporation rather than limiting transpiration, the process by which plants lose water through their leaves, water your plant at least once every day or two throughout the summer months when temperatures are at their highest. Instead of decreasing wilting, proper watering helps avoid it by preventing the plant from drying out too soon due to evaporation (evaporative cooling).
RELATED: How to Care for Black Velvet Alocasia? Complete Guide!
Alocasia Red Mambo Propagation
When compared to purchasing a new plant, propagating an Alocasia Red Mambo will result in significant cost savings. You simply have to get it done in the summer or the spring when the roots will develop more quickly. You are free to select the mode of propagation that best suits your needs from the options listed below.
Propagation of Alocasia Red Mambo with Corms
There is a higher risk of virus contamination in the corms, so this method is not advised for beginner gardeners. The process, on the other hand, is straightforward. Remove any debris or dirt from the roots of the plant after you’ve finished uprooting it. After that, use a sharp knife and cut the rhizome into pieces. Take the remaining cuttings and plant them according to the procedures separated in the prior methods. You should start to see results in a week or two.
Spreading an Alocasia Azlanii division is as easy as dividing the existing plant and planting the new divisions. This can be done quickly and easily by cutting the plant’s thick stem (the rhizome) into two or more pieces with a sharp knife. Before using something, make sure it has a hole, or “eye,” from which a new plant can grow. After that, you may either replant them in the soil or water them before setting them back into the soil, giving them access to the water and nutrients they need to flourish.
RELATED; Easy Tips How to care Alocasia Zebrina
Because offsets use a smaller form of your plant that is already established and healthy, they are a common method of propagating Azlanii’s. The process is also quite simple. If your Red Mambo plant is less than 7.5 centimeters (3 inches) in size, it may not be ready for propagation.
Carefully separate the Azlanii offset from the parent plant without disturbing the roots. Using a pair of pruning shears, cut the roots close to where they join the parent plant. Plant it carefully in a pot that is not too large compared to its eventual size, as this will increase the likelihood that it may rot from too much water.
This method is available after harvest. This happens when you’re busy or forgetful. This method is frustrating. Slower results will challenge your patience. Follow these instructions if necessary.
- The seeds must be steeped for a full night in water beginning in the fall. Afterward, scatter the seeds in well-drained soil.
- Soil seeds at a depth of 1.5 cm. You should fill the container with a little water and then seal it in a plastic bag. This method’s intent is to keep the relative humidity constant and steadily high.
- Place the container in bright indirect sunlight and keep the soil evenly moist.
- The ambient temperature is warm for the germination procedure. Therefore, the seedlings need to be kept in a warm setting. You can use a heat mat to keep the contents warm if you like.
- The seedlings should be transplanted when they reach a height of about five cm. Make sure the roots don’t get harmed in the process.
RELATED: How to Care for Alocasia? Elephant Ear Full Guide!
Alocasia Red Mambo Common Problems
Alocasia plants are delicate and prone to spider mites, mealybugs, scales, and aphids, so check them constantly when they appear. First, determine what’s harming your plant. Shake a sheet of white paper under your plant’s leaves to check for pests. Any bugs on the plant will fall onto the paper, allowing you to identify them and find a remedy.
One-size-fits-all pest management by keeping your plant’s natural environment. Red Mambos thrive in humid conditions. Increasing plant humidity by 50% will prevent several pests. Place your plant on a water-filled pebble tray and keep the area around it damp. Using a room humidifier will also help keep pests away from your Alocasia.
Clean its leaves often to prevent pests from establishing up camp in the Azlanii’s foliage. Every 1-2 weeks, professionals use washcloths with warm water. Some use gardening oil. This organic substance suffocates pests on the touch and is safe for Alocasia Azlanii. Before applying it everywhere, test a small area first.
Dropping leaves. This condition will manifest itself in the plant if it is allowed to go for an extended period of time without receiving any water. In this particular instance, the life cycle of the Alocasia azlanii plant starts to break down when it is submerged in water or does not receive enough water. The stem is gradually losing its strength and eventually falling over. This issue can be prevented by watering the plant on a consistent basis and in the appropriate amount.
Yellow leaves. Overwatering, poor soil moisture, and bug infiltration are some of the potential factors that could have led to this situation. Keeping the humidity high and providing enough amount of water are two solutions that help fix this issue.
Brown leaves. It’s possible that overwatering and pest infestation is to blame for this. The decaying stem of your plant may be an indication that it is suffering from root rot, even if the roots themselves are difficult to spot. To solve this problem, you will need to cut out the part that is diseased in order to preserve the healthy parts.
The brown spot. The leaves would eventually turn black if they were exposed to an excessive amount of sunlight, which would cause them to burn. It is necessary to cut back the plant’s foliage and allow it to continue growing in dim light to prevent the plant from perishing.
Shedding leaves. Both overwatering and underwatering are contributing factors that have led to this problem. Again, you need to be consistent with watering and make sure to meet the plant’s water requirements.
RELATED: How to Care for Alocasia Frydek Variegated?
How big does a Red Mambo get?
The Red Mambo is a plant that typically only grows to a height of about 2 feet (or 66 cm), making it one of the shorter species of Alocasia. In addition to this, the typical length of one of its leaves is about 20 centimeters or 8 inches.
Is the Alocasia Azlanii Toxic?
Raw plant eating may be exceedingly toxic to one’s health due to the presence of oxalate crystals within the plant. After penetrating the tissue, this insoluble and toxic component may make its way into the circulatory system. Irritation and swelling in the mouth and gastrointestinal tract would follow directly.
For the next two days, those who experience this effect should not eat anything. Even if they don’t suffer from tooth or gum disease, they still need to avoid eating or drinking for four hours before their appointment.
Experts advise wearing gloves when working with this plant for a number of reasons, including the following: Please keep your dogs and kids away from this plant.
Why Alocasia azlanii is rare?
The Alocasia azlanii is one of the recently identified plant species. A lot of people desire to bring it into their houses so they may show off its beautiful foliage. This plant is incredibly rare to come across due to its endemic status in Borneo, where it is the only native species.